Schwalbe forme sa gamme Super Gravity

Merci Quentin pour le tuyau. Ça m’a l’air très sympa.

Schwalbe forme sa gamme Super Gravity

Super Gravity est le nom de la gamme Gravity du géant allemand du pneu, Schwalbe.
Il est composé de 4 profils de pneus : Magic Mary, Dirty Dan, Rock Razor et Hans Dampf. Tous utilisent la nouvelle carcasse imaginée par Schwalbe visant à renforcer le pneu et le faire durer plus longtemps.

Voici les photos des profils des 4 pneus – ils laissent assez facilement deviner leurs usages !

Magic Mary – le pneu enduro


Dirty Danle pneu enduro pour la boue


Rock Razor – le pneu roulant pour le sec


Hans Dampf : le super polyvalent pour les trails


Toutes les informations, notamment la dispo des différentes gommes Schwalbe sur chaque référence, sont détaillées sur le site dédié à cette nouvelle gamme : Super Gravity sur le site Schwalbe

Ces pneus sont utilisés par les riders sponsorisés par la marque : Nicolas Lau & Steve Smith


2013 Santa Cruz Heckler 27.5

Et de 3! Viiiiite, Intense, réagit!

2013 Santa Cruz Heckler 27.5

Introduction by Francis Cebedo

Santa Cruz announced another bike today and it’s the venerable Heckler. It features 27.5″ wheels, 150mm of travel, fancy colors and the knockout punch is it’s actually affordable. Until today, 27.5″ bikes in general have been coveted by many but out of reach for most, as most of the price tags have hovered between $5k and $10 thousand Benjamins.

This new 27.5″ is available at $2600 and $3000 complete.

And it’s not just the same old single-pivot Heckler in version 7.0 wrapper. Some of the significant changes are:

  • 27.5″ wheels
  • 150 mm of front and rear travel
  • Exact geometry as the Santa Cruz Bronson
  • New 142mm x 12mm rear axle spacing – easier wheel installation
  • Collet axle pivot – locks in place without pinch bolts
  • Angular contact bearings maximize stiffness
  • Standard or direct mount rear derailleur hanger
  • ISCG-05 chainguide compatibility
  • 6.76 lb frame
  • $1299 frame price

No, there’s no carbon version and fancy video with this release. But not only can you covet this bike, you can actually afford it too.

From the Manufacturer

In its seventh incarnation, the Heckler still allows you to order from the all-mountain menu like it’s Happy Hour.

Now with the same super awesome geometry* as the acclaimed Bronson, plus 150mm travel and 27.5” wheels to match, there’s been no half measures in the new Heckler’s development.

Legions of Heckler owners testify to the durability of the design, marching on through season after season while other bikes at this price point simply rattle to pieces. The aluminum frame is now stiffer and lighter than its predecessor, with a single collet axle pivot, 142mm rear end and a direct mount rear derailleur hanger keeping things tight and tidy.

So as the Heckler prepares to celebrate its 18th birthday in Club Tropicana** colors, you can rest assured this single pivot party will keep going long after the others have gone home.

*Super awesome geometry is not a Santa Cruz trademark.
**Drinks probably not free, so black is also available.

  • Total frame weight: 6.76 lb (3.07 kg) M size with Fox Float CTD evolution shock.
  • 6” (150mm) travel.
  • 27.5” wheels.
  • New 142mm x 12mm rear axle spacing – easier wheel installation.
  • Collet axle pivot – locks in place without pinch bolts. • Angular contact bearings maximize stiffness.
  • Standard or direct mount rear derailleur hanger.
  • ISCG-05 chainguide compatibility.
  • 73mm threaded BB for creak-free riding and easy installation.
  • Two color options: Gloss black w/orange decals and Gloss blue w/green decals
  • Complete bikes starting at $2599 (US) / $2899 (CAN) for D-AM kit.
  • Frame $1299 (US) / $1399 (CAN) with Fox Float CTD evolution shock.
  • 5 year warranty for original owners
  • Lifetime bearings warranty
  • Lifetime crash replacement warranty

Based on 544.4mm axle-crown:

Millimeters (mm)

Inches (“)

For more information visit

Formula T1 25th Anniversary The One brakes review


Formula T1 25th Anniversary The One brakes review

Twenty-five years is a long time in mountain biking, so Italian brake manufacturers Formula chose to celebrate by making just 600 pairs of these specially finished and anodised brakes.

The one piece forged calliper uses 24mm pistons, but with minor tweaks for 2013. Improved piston retraction reduces rubbing and there’s angled hose routing for better clearance. The top loading pads are easy to fit.

As with all current Formula brakes they use radial levers; the master piston sits perpendicular to the bar and forms both the body and the clamp, so they can run on either side. A complete 180mm front brake weighs 397g.

There’s tool-free reach and bite point adjustment for the lever, but riders who like to run levers so they sit close to the bar and bite even closer found it hard to get a position that worked.

If you dial both adjusters all the way in for a close bite point and minimal lever throw, the lever can actually connect with the body itself, stopping you braking any harder. Less extreme setups were fine, though the large hook on the lever end split opinion again.

The feel is markedly different from both Avid and Shimano, with a less vicious initial bite that progresses into serious stopping power with plenty of feel. The glossy, gunmetal-style finish certainly looks the part, and the general quality of construction is top notch.

Santa Cruz Solo Carbon – first ride review

Enfer! Que choisir entre un Solo et un Bronson? Bon courage et Thomas!

Santa Cruz Solo Carbon – first ride review

After the exciting introduction of the 150mm Santa Cruz Bronson, it looked as though the US company were content with an already packed line-up. So when they announced a further addition to their range we were struggling to work out the gap they were trying to fill. Step in the Solo, a 5in travel, 27.5in wheel trail bike developed from what Santa Cruz say they learned while creating the Bronson.

Ride & handling: Rare balance of fun and efficiency, just watch those pedals

The VPP rear end of the Santa Cruz Solo is particularly efficient, resisting bob admirably in all situations. Fox’s CTD rear shock allows for further efficiency gains at the flick of a switch (in Trail mode), the trade-off being the usual drop in small bump compliance. With Climb mode enabled the rear end of the bike demonstrates its immense stiffness. For the majority of riders, the most limiting factors on this bike’s uphill ability will be their lungs and legs.

The linkage combines both a rising and falling rate action to provide impressive traction and control without a penalty on your pedalling. As with all VPP bikes, it’s sensitive to set up. We experimented with pressures a little mid-ride before getting things dialled. Soon we were comfortably getting the full travel of the bike, feeding inspiring traction through all contact points without feeling any harsh bottoming or aggressive ramp-up.

Up front, the 130mm Fox 32 Float CTD fork did a great job of pairing with the rear of the bike. Its relatively skinny chassis never felt overwhelmed, although steering accuracy was certainly aided by ENVE’s superlight and stiff 27.5in carbon hoops.

The fork did tend to dive a little too much for our liking in the Descend setting, occasionally making the bike feel steeper than its 68-degree head angle would suggest. We preferred the front end in Trail mode, the extra low-speed compression keeping the angles as intended.

anta cruz solo carbon :

Stiff, light and extremely bright

The Solo’s geometry results in an agile, keen feel, with great overall balance and a real talent when it comes to changing direction quickly. We had to be conscious of that bottom bracket height, though – our test pedals came away with a few scars. We see this as a trait rather than a problem, as it’s simply the price to pay once you realise the agility and handling potential of the Solo.

Riders looking for a revolutionary 650b ride might want to close this page now – the ‘27.5in wheel’ element of the Solo became apparent after a few hours in the saddle, but isn’t something most riders will pick up on immediately.

Expect the ride of a 26in-wheeled bike, plus a little more stability and roll-over. It’s always easy to pop the front of the bike and generally play around, too – there’s no doubt that the Solo is more fun than a 29er in this respect.

The impressive suspension action delivered through the light and tight chassis means the last thing on your mind is the size of the wheels. The Solo just gets on with it.

It’s the perfect companion for exploring the unknown, and manages to shine regardless of whether gravity is on your side or not. If you haven’t had a chance to check out the Solo’s promotional video then perhaps you should. For us, it encaptures what the bike is all about…

Please install Adobe Flash player to view this content

Frame & equipment: Tight and light, with proven suspension and superb detailing

Riders familiar with Santa Cruz’s current line-up will inevitably be drawing comparisons between the Solo and the current Blur TRC. Some of the figures are close, yes, but not the same – this isn’t simply a Blur TRC with 27.5in hoops.

Compared with the Bronson, the Solo is stanced lower and shorter. The head angle is also one degree steeper, with slightly shorter chainstays and a bottom bracket drop of half an inch.

The 142mm rear end of the Solo holds its derailleur hanger in place using a fuss-free single bolt; that’s just one of many small but practical touches that make this bike very friendly to work on.

Another relief for the home mechanic comes in the form of the alloy pivot hardware. Designed with muck in mind, it features an innovative sealing system that promises durability in the toughest of environments.

Bucking the press-fit trend, the Solo sticks to a 73mm threaded bottom bracket. ISCG 05 tabs are standard and each frame gets two bottle mounts regardless of the size. Along with a nifty snap-on chainstay protector, Santa Cruz have also added rubberised down tube protection – it’s nothing that will fight off rock strikes but should keep things looking pretty should you take a rough uplift.

The fox ctd shock offers convenient and useful compression adjustment:

The Fox CTD shock offers useful and convenient compression adjustment, but the Solo climbs well in any setting

Our test bike came with all the options ticked. That meant a Shimano XTR single drivetrain (not pictured), matching stoppers from the XTR line, and ENVE’s extravagant but superb 650b carbon hoops. An Easton Havoc carbon bars was also in place, providing ample width with comfortable angles.

We didn’t have scales to hand but Santa Cruz claim a figure of just over 25lb (11kg) for the test build. Familiar traction was provided by Maxxis’ fast rolling Ardent tyres.

The Solo Carbon is available in various build kits. Prices start at £4,399/US$4,199 but start ticking off those extras and the figure can almost double. Four sizes are on offer, ranging from S to XL. An aluminium version of the Solo is also available now – full alu builds start at £3,599/US$3,299 while a frameset is £1,799 – saving £800 over the carbon frame’s retail price.

This is the bike that should have potential Bronson customers scratching their heads – trying to choose between the two could be tricky. Still, it sounds like a pretty good problem to have to us…

Nouveautés – VTT

Voilà, voilà, la Sea Otter s’est tenue en avril, ouvrant le bal des nouveautés 2014. Les news sont d’ailleurs assez décevante je trouve, et à part l’explosion du 27,5 / 650B, il n’y finalement pas grand chose à se mettre sous la dent. Le XX1 fait une percée remarquée, Fox revoit ses CTD, Shimano investit sur son XTR mode XC.

J’ai néanmoins regroupé toutes les news dans le menu, sous VTT, comme je l’avais fait pour 2013.

Gageons que 2015 nous étonnera plus, avec la disparition du 26, le lancement d’un 1×11 chez Shimano et l’apparition de nouvelles générations de tiges de selles téléscopique, sous la barre des 400g.

Park Tool Celebrates 50th Anniversary

Tradition! Bon anniversaire.

Park Tool Celebrates 50th Anniversary

Park Tool is a brand name well known in the bike industry for quality and durability. Our very own Mtbr work shop is stocked with the Park Tool PK-65 kit and PRS-25 repair stand. Walk into ANY bike shop and you will find Park Tools. Every year at Interbike, we see the latest and greatest from Park and they had some pretty cool products on display including their all new power lift stand and other new innovations. This year marks their 50th Anniversary for Park Tool and they have created a retrospective video on the history and legacy of how they came to be.

Park Tool co-founders Art Engstrom and Howard Hawkins discuss how the seeds for the company were planted in the back of a little bike shop (Hazel Park Bicycle) on the east side of St. paul, MN in 1956 (the company became incorporated in 1963). Their very first tool was a “rudimentary” repair stand that changed the industry forever.

Click here to view the embedded video.

From their humble beginnings, Art and Howard excelled. Their bike shop became the biggest Schwinn dealer in the country. Recognizing the need for quality tools that made life easier, simpler and quicker for the bike mechanic, they built a brand that soon became known for quality products that worked and were delivered on time. From the original two employees in 1963, Park Tool now has about 50 employees today and is a worldwide recognized brand.

It is interesting to see how such a vintage company can use the latest technology to stay at the top of the bike industry with its ever changing landscape.

Howard Hawkin’s son Eric is the President and CEO of Park Tool and he sums it up by saying, “We’ve been extremely blessed over the years. We have a successful business and there’s still a lot to do and there’s a lot of things that we can do as a company to get better. If you want to narrow it down and say this is our mission, I’d say it’s to make the best tools we can, to be innovative, to stay on top of the changes in a fast-changing industry, and to have fun doing it. We believe we’re going to be around for another 50 years.

We here at Mtbr would like to give thanks to all the Park Tool guys that we know personally (Calvin, Bill, Eric) and to your co-workers for building such awesome products that make even the most menial tasks of bike maintenance just THAT much easier and yes…fun.

For more info:

RockShox Pike Fork and Monarch Plus Shock

Pour la partie enduro.

RockShox Pike Fork and Monarch Plus Shock

RockShox Pike Fork

The Pike is a complete new redesign for RockShox, and the All-Mountain fork will be available in 150mm and 160mm travel for the 26″, 27.5″ and 29″ sizes (29er also gets 140mm), with tapered aluminum steerer and 15mm Maxle. The all-new chassis has 35mm stanchions, a highly engineered crown and asymmetric lower legs. The asymmetry means they added a supporting power bulge by the lower bushings, and continued the taper down on the braking side for strength, while the non-braking stops 40mm down for weight savings. In addition, the lower leg casting on the spring side leg has more volume on the inside than the damping side for lightening purposes.

Click here to view the embedded video.

The Pike will come in two different spring systems, the Solo Air and Dual Position Air, and they’ll use the new Charger damper, which comes in an RCT3 and RC versions.

The Charger is an fully bleed cartridge system that uses a extruded bladder design, that expands as the fork compresses, which keeps air out of the system for consistency and smoothness, and offers good weight savings. The RCT3 offers three adjustment modes, open, pedal and lock, and has a adjustable low speed compression in open. The simpler RC has an open mode to one with increasing compression all the way to lock. Both Charger damper versions feature their Rapid Recovery rebound damping technology, which keeps the fork high in its stroke in the softest part of the spring curve, without packing down from multiple successive bumps, letting the fork do the work instead of the rider. The Dual Position Air allows 30mm of travel adjustment, and works by transferring air between chambers, while the Solo Air is fixed-travel.

Click here to view the embedded video.

Pike Specs:
26″– 150 and 160mm travel, 1835g weight
27.5″ – 150 and 160mm travel, 1861g weight
29″– 140 and 150mm and 160mm travel, 1876g weight
MSRP: $980 – 1085

RockShox Monarch Plus Rear Shock

The Monarch Plus uses the Solo Air spring, their RC3 or R damper, and Rapid Recovery rebound damping technology. They redid all the damping circuit and increased the damper shaft diameter by 1mm to 10mm, so oil flow has been increased, for more consistent and quieter ride, and tuning opportunities. The RC3 shock lever has three adjustments, open, mid and full compression (open, pedal, lock). They added larger volume to the negative air spring, to help reduce the amount of force it takes on initiate bump movement through the first third of travel. It has some nice indention markings on the shaft for sag set up.

Monarch Plus Specs:
MSRP – $486
Weight – 325g
Sizes – 190X51/7.5X2.0, 200X51/7.875X2.0, 200X57/7.875X2.25, 216X63/8.5X2.5 and 222X66 / 8.75X2.6